Daughter Cards

Multimedia

  • Support 12G/6G/3G/HD/SD-SDI standard
  • AES Audio inputs and outputs.
  • Video and Image Processing Applications

(Currency: USD)
$1,200

  • HDMI 1.4a Compliant 
  • 3D format Support 
  • High Bitrate Audio Support 
  • 4Kx2K@30Hz Support

(Currency: USD)
$540

  • 7" 800x480 LCD module with 5-point touch
  • 8Mega Pixel  Color Camera
  • Light Sensor, Acceleromter, Gyroscope, Magnetometer

(Currency: USD)
$360

  • Support HSMC interface
  • Dual HDMI receiver port
  • Video and Image Processing applications

(Currency: USD)
$215

  • Support HSMC interface
  • HDMI transmitter
  • Video and Image Processing applications

(Currency: USD)
$170

  • Support HSTC interface only
  • HDMI transmitter & receiver port
  • Video and Image Processing applications

(Currency: USD)
$299

  • Support 3G/HD/SD-SDI standard
  • SDI and AES inputs and outputs.
  • Video and Image Processing Applications

(Currency: USD)
$490

Interface Conversion

Terasic’s SoC FMC Daughter Card is an extension and evaluation platform that provides cost-effective extension opportunity and effortless prototyping/evaluation for our clients’ to simplify the system design.

(Currency: USD)
$199

  • Convert FMC+ transceiver channels to PCIe x16 Edge.
  • Support up to PCIe Gen4 x16
  • Support FMCC+ VADJ 1.2V/1.5V/1.8V/2.5V/3.0V

(Currency: USD)
$520

  • VITA 57.4 FMC+ or Vita57.1 FMC form factor
  • Mates with HPC or LPC carrier boards
  • Ultra-Low Jitter Clock Multiplier for clock testing

(Currency: USD)
$199

  • Compatible with FMC interface
  • Four 40-pin expansion headers
  • 2x6 TMD header and SMA/Button/Switch/LED

(Currency: USD)
$170

  • Transceiver channels to SMA connectors
  • Support 4 transceiver channels
  • FMC interface

(Currency: USD)
$370

  • Four ADC Channels
  • ADC Chip AD9648BCPZ-125, 14-bits, 125 MSPS
  • FMC Interfaced

Contact Us

  • Drive up to 24 servo motors simultaneously 
  • MG996R Servo Motor is included
  • Open source example is provided

(Currency: USD)
$130

  • Up to 8.0Gbps PCIe 3.0 Serial ReDriver
  • PCIe x4 Gen 3
  • Adjustable receiver equalization
  • Adjustable transmitter amplitude and de-emphasis

(Currency: USD)
$182

  • 4 single lane channel SATA/SAS interface
  • Integrated SATA/SAS 4 channel lane connector
  • Storage Applications

(Currency: USD)
$550

• Transceiver channels to SMA connectors
• Support 4 transceiver channels
• SMA connectors for PLL

(Currency: USD)
$180

  • Two 14-bit AD and DA converters
  • AD and DA up to 150MSPS and 250MSPS
  • DSP Applications

(Currency: USD)
$600

  • Support HSMC or GPIO interface
  • Two 14-bit AD/DA converters
  • DSP Applications

(Currency: USD)
$305

  • Compatible with HSMC interface
  • Three 40-pin expansion headers
  • Test points for signal measurement

(Currency: USD)
$55

Video & Image

  • Support 12G/6G/3G/HD/SD-SDI standard
  • AES Audio inputs and outputs.
  • Video and Image Processing Applications

(Currency: USD)
$1,200

  • Omnivision 8 Mega Pixel Image sensor
  • Voice Coil Motor (VCM) for focus control
  • MIPI Decoder
  • HDMI TX
  • FMC Interface

(Currency: USD)
$229

  • Omnivision 8 Mega Pixel Image sensor
  • Voice Coil Motor (VCM) for focus control
  • MIPI Decoder
  • 2x20 GPIO to compatible with DE series FPGA Board

(Currency: USD)
$120

  • 7" LCD, 800x480 Resolution,  24-bit Color
  • Capacitive Touch, Multi-Touch Gesture Support, Single Touch Support
  • 2x20 GPIO Interface, Compatible with DE2-115 / DE2 / DE3 /DE4

(Currency: USD)
$199

  • Interfaces Aptina standard parallel socket with Altera HSMC connector
  • Compatible with many Altera FPGA boards (DE2-115, DE3, DE4, etc.)
  • Supports a wide array of Aptina Sensors

(Currency: USD)
$130

  • Support of standard Camera Link modes (base, medium, dual base assembly)
  • Serial Communication with camera
  • Simple interface
  • Automatic detection by hardware / software
  • Two LVDS 28-bit channel link chip (DS90CR288A)

(Currency: USD)
$249

  • Support HSMC interface
  • Dual HDMI receiver port
  • Video and Image Processing applications

(Currency: USD)
$215

  • Support HSMC interface
  • HDMI transmitter
  • Video and Image Processing applications

(Currency: USD)
$170

  • 2.4" LCD touch module with 240(H) x 320 (V) pixel resolution LCD with 65K RGB color
  • Single resistive touch
  • 2x20 GPIO interface

 

(Currency: USD)
$60

  • Support UXGA resolution
  • DVI transmitter/receiver
  • Video/Image Processing

(Currency: USD)
$219

  • Support HSTC interface only
  • HDMI transmitter & receiver port
  • Video and Image Processing applications

(Currency: USD)
$299

  • Support 3G/HD/SD-SDI standard
  • SDI and AES inputs and outputs.
  • Video and Image Processing Applications

(Currency: USD)
$490

Networking

  • One FMC connector for interface conversion, host boards supporting FMC(HPC)-compliant connector can work with this daughter card.
  • Four-Port Integrated 10/100/1000 Gigabit Ethernet transceiver Supports SGMII/GMII/MII/RGMII MAC interfaces for direct connection to a MAC/Switch port
  • Dynamically configurable to support 10Mbps, 100Mbps (Fast Ethernet) or 1000Mbps (Gigabit Ethernet) operation
  • Uses standard Cat 5 UTP (unshielded twisted pair) cabling
  • Requires a 25-MHz reference clock driven from a dedicated oscillator
  • Complete Reference Design 

(Currency: USD)
$395

  • Two independent XAUI interfaces from the HSMC to the BCM8727
  • Two independent SFI interfaces from the BCM8727 to SFP+ cages
  • MDIO interfaces
  • I2C EEPROM for HSMC identification and user data
  • Si5334C clock generator
  • 156.25MHz reference available on SMA connectors and through the HSMC connector
  • 4 user bi-color LEDS for each channel (8 total bi-color LEDs)

(Currency: USD)
$785

  • High-Speed Mezzanine Card (HSMC) connector for interface conversion
  • Two CAN DB9 connector
  • Two RS-485 DB9 connector
  • RS-232 DB9 connector

(Currency: USD)
$195

  • RGMII Ethernet PHY, RJ-45 connector
  • USB 2.0 OTG PHY with ULPI
  • RS-485 x2 with 2x5 0.1* header
  • CAN x2 with DB9 connector
  • GPIO with 2x3 0.1* connector

(Currency: USD)
$320

  • 4 single lane channel SATA/SAS interface
  • Integrated SATA/SAS 4 channel lane connector
  • Storage Applications

(Currency: USD)
$550

  • Duel-Port Gigabit Ethernet transceiver
  • Gigabit Ethernet Applications
  • Reference design with source code

(Currency: USD)
$300

  • 4 Transceiver and LVDS based channels
  • SONET, Fiber Channel, Ethernet
  • Communication Applications

(Currency: USD)
$590

AD/DA

  • Four ADC Channels
  • ADC Chip AD9648BCPZ-125, 14-bits, 125 MSPS
  • FMC Interfaced

Contact Us

  • Two 14-bit AD and DA converters
  • AD and DA up to 150MSPS and 250MSPS
  • DSP Applications

(Currency: USD)
$600

  • Support HSMC or GPIO interface
  • Two 14-bit AD/DA converters
  • DSP Applications

(Currency: USD)
$305

Robotics/Motors

  • Two motor axes, each with three-phase MOSFET power stages operating up to 125 kHz
  • Input voltage range 9 to 16 V DC
  • DC link voltage of 12 to 48 V from DC-DC boost-buck converter
  • Enpirion® switch mode power supplies for logic, position sensors, MOSFET gate drives and regulated 12 V output
  • Sigma-delta ADCs for sensing voltages and currents
  • Direct analog connection to suitable development kits such as the MAX® 10M50 Development Kit
  • Sensed motor phase currents and voltages to enable sensorless control
  • Position feedback interfaces for each axis

Contact Us

  • Drive up to 24 servo motors simultaneously 
  • MG996R Servo Motor is included
  • Open source example is provided

(Currency: USD)
$130

RF

  • Wi-Fi, using ESP32-WROOM-32E module
  • Classic Bluetooth (BT) and Bluetooth Low Energy(BLE), using ESP32-WROOM-32E module
  • 9-axis sensor: accelerometer,gyroscope,magnetometer
  • Ambient light sensor
  • Humidity and temperature sensor
  • UART to USB
  • 2x6 TMD GPIO Header

(Currency: USD)
$89

• Fully qualified Bluetooth® version 2.1 module, supports version 2.1 + Enhanced Data Rate (EDR)
• Backwards-compatible with Bluetooth version 2.0, 1.2, and 1.1
• Low power (26 uA sleep, 3 mA connected, 30 mA transmit)

(Currency: USD)
$50

  • Configurable digital interface to a processor—RF front end with a flexible mixed-signal baseband section and integrated frequency synthesizers
  • Operates in the 70 MHz to 6.0 GHz range—covers most licensed and unlicensed bands
  • Tunable Channel Bandwidth—<200 kHz to 56 MHz
  • Complete dual- or single-channel integrated wideband transceiver on a single chip

(Currency: USD)
$750

Testing

  • VITA 57.4 FMC+ or Vita57.1 FMC form factor
  • Mates with HPC or LPC carrier boards
  • Ultra-Low Jitter Clock Multiplier for clock testing

(Currency: USD)
$199

This package consists of HSMC adapters that are intended for testing and debugging purposes over the High-Speed Mezzanine card (HSMC). The package includes two loopback high-speed mezzanine connector (HSMC) cards and a debug HSMC card which can be connected to any HSMC interface.

  • Compatibility: Any HSMC-based host board

 

(Currency: USD)
$99